Decorative Applied
Moulding Doors
Go to the bottom of this page for Product Offerings and Availabilities. Below each color photograph are listed the Door Design, the minimum sizes, panel information and the Drawer Front name. The line drawing below each photograph shows a cross-section of the door.
LaSalle
Min.: 8 5/8" w x 8 5/8"h
2 7/8" Framing
M-Bead Raise Shown
Drawer Front: LaSalle DF
Marquis
Min.: 8 7/8" w x 8 7/8"h
2 15/16" Framing
Louis XIII Raise Shown
Drawer Front: Marquis DF
Monaco
Min.: 8 1/4" w x 8 1/4"h
2 11/16" Framing with
Block in Each Corner
M-Bead Raise Shown
Drawer Front: Monaco DF
Royal
Min.: 5 5/8" w x 5 5/8"h
2 5/16" Framing
1/4" Veneered Panel
Drawer Front: Royal DF
Optional: Gainsborough DF
Saxony
Min.: 7 1/2" w x 7 1/2"h
2 5/16" Framing
M-Bead Raise Shown
Drawer Front: Saxony DF
Versailles
Min.: 5 5/8" w x 5 5/8"h
2 5/16" Framing
1/4" Veneered Panel
Drawer Front: Versailles DF
Cornwall
Min.: 7 1/2" w x 7 1/2"h
M-Bead Raise Shown
Drawer Front: Cornwall DF
Cotswald
Min.: 7 1/2" w x 7 1/2"h
M-Bead Raise Shown
Drawer Front: Cotswald DF
Newbury
Min.: 7 1/2" w x 7 1/2"h
M-Bead Raise Shown
Drawer Front: Newbury DF
TW Cornwall
Min.: 7" w x 5 5/8"h
1/4" Veneered Panel
Drawer Front: TW Cornwall DF
TW Cotswald
Min.: 7" w x 5 5/8"h
1/4" Veneered Panel
Drawer Front: TW Cotswald DF
TW Newbury
Min.: 7" w x 5 5/8"h
1/4" Veneered Panel
Drawer Front: TW Newbury DF
Product Offering and Availabilities:
  • Note:
    Framing widths on all designs are measured across the back of the framing. Minimums listed on LaSalle, Saxony, Marquis, and Monaco are based on raises shown. 
    Framing widths on all designs are 2 5/16" unless otherwise noted, and they are measured across the back of the framing.
    Minimums will vary depending on panel raise selection.
  • Wood Species:
    • LaSalle, Marquis, and Saxony – available in 3/4" Alder, Cherry, Hard Maple, Lyptus, Pain Grade Hard Maple, Soft Maple, Red Oak and White Birch.
    • Royal and Versailles – available in 3⁄4” Cherry, Hard Maple, and Red Oak. 
    • Alder, Cherry, and Lyptus rope moulding designs will receive Cherry rope moulding.
    • Hard Maple, Paint Grade Hard Maple, Soft Maple, and White Birch rope moulding designs will receive Maple rope moulding.
    • Red Oak rope moulding designs will receive Red Oak rope moulding.
    • Monaco available in 3⁄4” Alder, Cherry, Hard Maple, Lyptus, Paint Grade Hard Maple, Soft Maple, and White Birch. Monaco design ordered in Alder, Cherry, and Lyptus will receive carved Beech applied bead moulding and Cherry corner blocks.  Monaco designs ordered in Hard Maple, Paint Grade Hard Maple, Soft Maple, and White Birch will receive carved Hard Maple applied bead mouldings and corner blocks. 
    • On designs where the species of the mouldings differs from the door, there may be a slight color variation even after finish is applied.
  • Edge Profiles:
    LaSalle and Royal standard as shown – no choices available.
    Versailles – all 3/4" profiles available.
    Marquis, Monaco, and Saxony – all 3/4" profiles avaiable except B, C, H, PRS, V, FEP, Machine Edge with Rabbet.
  • Framing Beads: All doors standard as shown. No other choices available.
  • Panel Raises: Royal, Versailles – 1⁄4” veneered panel. LaSalle, Marquis, Monaco and Saxony – all 3/4" raises available.
  • Options:
    All doors can receive concealed hinge routs, radius corners, back-routed hand pull, face-routed hand pulls, except LaSalle and Royal – radius corners and face-routed pulls not available.
  • Mullions:
    LaSalle & Marquis, Saxony  are available in frame only and mullions.
    Royal and Versailles – frame only and mullions not available.
  • Appliance Panels:
    Apply over plywood options – all available.
    Glue in strips –all except LaSalle and Royal.