One Inch Thick
Door Collection

Go to the bottom of this page for Product Offerings and Availabilities. Below each color photograph are listed the Door Design, the minimum sizes, panel information and the Drawer Front name. The line drawing below each photograph shows a cross-section of the door.
CRP 10 - 1"
Min.: 7 1/2" w x 7 1/2"h
2 5/16" Framing
Slant Raise Shown
Drawer Front: CRP 10 - 1" DF
CRP 10A48 - 1"
Min.: 9 1/4" w x 9 1/4"h
3" Framing
P-Raise Shown
Drawer Front:
CRP 10A48 - 1" DF
CRP 30 - 1"
Min.: 8 1/4" w x 8 1/2"h
2 5/16" Framing
Slant Raise Shown
Drawer Front: Marcel 1" DF
Normandie - 1"
Min.: 9 3/4" w x 9 3/4"h
3 3/8" Framing
P-317 Raise Shown
Drawer Front:
Normandie - 1" DF
Provence - 1"
Min.: 10" w x 10"h
3 3/8" Framing
P-320 Raise Shown
Drawer Front: Province - 1" DF
Staffordshire - 1"
Min.: 10 7/16" w x 10 7/16"h
3 3/8" Framing
P-316 Raise Shown
Drawer Front:
Staffordshire- 1" DF
Product Offering and Availabilities:
  • Special Note:
    Minimums listed are based on raises shown.
    Minimums will vary depending on the panel raise selection.
    The framing bead on the Normandie, Provence and Staffordshire is designed to accept a 7/8" thick panel that is flush with the framing on the face of the door.
    This design gives an increase depth to the raise profiles on these doors.
  • Wood Species:
    All 1" species available In CRP 10, CRP 10A48, and CRP 30 except quarter sawn and rustic knotty.
    Normandie, Provence, and Staffordshire are available in Cherry, Hard Maple, Paint Grade Hard Maple, Pine, and Red Oak only.
  • Edge Profiles: All 1" available including L-772 and L-780
  • Framing Beads:
    CRP 10, CRP 10A48, and CRP 30 - all 1" profiles available.
    Normandie, Provence, and Stafforshire - standard as shown, no choices available.
  • Panel Raises:
    CRP 10, CRP 10A48, and CRP 30 - all 1" raises available.
    Normandie, Provence, and Staffordshire - 3/8" Rev. G-Cove, P-316, P-317, and P-320 only.
  • Options:
    All available except face routed hand pull.
    Camelot rout only available on CRP 10 and CRP 30.
  • Mullions: All available. Normandie, Provence, and Staffordshire receive a special lite charge.
  • Appliance Panels: All available with apply over plywood or glue-in strips.