Shaker Design Doors
Go to the bottom of this page for Product Offerings and Availabilities. Below each color photograph are listed the Door Design, the minimum sizes, panel information and the Drawer Front name. The line drawing below each photograph shows a cross-section of the door.
Amesbury
7 1/2" w x 7 1/2"h
Bead Standard as Shown
5/8" Rev. G-Cove Raise Shown
Drawer Front: Amesbury DF
Fairhaven
7" w x 7"h
Bead Standard as Shown
Edge Profile: L149 Shown
1/2" Rev. G-Cove Raise Shown
Joints have eased edges
Drawer Front: Fairhaven DF
Madison
6 7/8" w x 6 7/8"h
Bead Standard as Shown
1/2" Rev. G-Cove Raise Shown
2 1/4" Framing
Drawer Front: Madison DF
Sheldon
11 3/8" w x 6 3/4"h
Bead Standard as Shown
3/8" Rev. G-Cove Raise Shown
Drawer Front: Sheldon DF
Stockbridge
7" w x 5"h
Bead Standard as Shown
1/4" Veneered Panel as Shown
Drawer Front: Stockbridge DF
Windham
7 " w x 6 3/4"h
Bead Standard as Shown
Edge Profile standard as shown
3/8" Rev. G-Cove as Shown
Drawer Front: Windham DF
Albany
7 " w x 6 3/4"h
Bead Standard as Shown
3/8" Rev. G-Cove Raise Shown
Drawer Front: Albany DF
Product Offering and Availabilities:
  • Note: Unless specified otherwise, framing width on all designs is 2 5/16" measured across the back of the framing. Minimums will vary on Amesbury depending on the panel raise selection.
  • Wood Species: All 3/4" species available except in Stockbridge and Madison designs.
    Stockbridge available in all species except Mahogany, Soft Maple, or rustic knotty series.
    Madison available in all species except quarter sawn and rustic knotty.
  • Edge Profiles: Albany, Amesbury, Madison, Sheldon and Stockbridge - all 3/4" profiles available.
    Fairhaven all 3/4" profiles available except LC Inset and Sophisticate.
    Windham - no options available.
  • Framing Beads: Standard as shown - no options available.
  • Panel Raises: Amesbury - 5/8" raises include Rev. U-Cove, Rev. G-Cove and Rev. Slant. 3/8" Raises include G-Cove (specify P240 Raise) and Rev. G-Cove. Other doors standard as shown. Stockbridge 1/4" veneered panel only.
  • Options: All available except Camelot rout. G-121 rout not available in Stockbridge. Face routed hand pull not available on Windham.
  • Mullions: All available. We recommend: the CRP 10 mullion with square bead when ordering Amesbury and Fairhaven and the CRP 10751 mortise and tenon with regular or square bead mullions when ordering the Madison.
  • Appliance Panels: All available in apply over plywood or glue in strips except Windham. Windham - apply over plywood only.