One Piece
Drawer Fronts
Drawer Front images are also shown above most of the door designs shown on this website.

Go to the bottom of this page for Product Offerings and Availabilities. Below each photo are listed the Door Design, minimum sizes, the panel raise that is shown and the drawer front that is shown.

Slab
1 1/2" w x 2 1/2"h
Any Edge Profile
3/4" or 1"
#10
3" w x 3"h
Matches Slant Raise
3/4" or 1"
Keystone
2 3/4" w x 2 3/4"h
Matches G-Cove Raise
3/4" or 1"
10141
3 1/4" w x 3 1/4"h
3/4" or 1"
10946
4 1/2" w x 4 1/2"h
3/4" Thickness Only
DVG Batten
6" w x 3 1/2"h
3/4" Thickness Only
1 1/8" Sandwich
3 1/2" w x 3 1/2"h
3/4" Slant Raise Shown
Specify Panel Raise and Edge Profile.
2 Slabs are glued together to create a thicker drawer front.
1 1/2" Sandwich
3 1/2" w x 3 1/2"h
1" Slant Raise Shown
Specify Panel Raise and Edge Profile.
2 Slabs are glued together to create a thicker drawer front.
Product Offering and Availabilities:
  • Special Note:
    Drawer fronts have horizontal grain unless otherwise specified except DVG batten. Vertical grain available upon request.
  • Wood Species:
    All designs available in 3/4" species. All designs except DVG batten available in 1" species.
  • Edge Profiles:
    3/4" slab, DVG, 1" #10, 1" Keystone, 1 1/8" Sandwich - all 3/4" profiles available.
    3/4" Keystone - not available in "O" edge.
    1 1/2" Sandwich - E-lip and all 3/4" edge profiles without rabbet available.
    10946 - standard as shown, no choices available.
    All other designs - all profiles without rabbet available.
  • Panel Raises:
    Keystone, #10, and 10141 raises standard as shown; no options.
    1 1/8" Sandwich - all 3/4" panel raises available
    1 1/2" Sandwich - all 1" panel raises available
    Slab, DVG batten, and 10946 - not applicable
  • Options:
    Slab - pegs, radius corners, face routed hand pull and back routed hand pull, distressing, and wear sanding.
    10946 - back routed hand pull and distressing only.
    All others - face routed hand pull, back routed hand pull, distressing, and wear sanding only.
  • Appliance Panels:
    10946 - apply over plywood only
    All others - apply over plywood or glue-in strips available.