Frame Only and Mullion Doors
We offer a wide variety of frame-only and mullion configurations and options. The illustrations below are only a representation of available patterns. Contact our office if your requirements are not shown below.

Standard Frame Only and Mullion Doors come in Regular, Ogee, Square and Special Bead Mullions and are fitted for one piece of glass per door. This is standard unless otherwise specified.

True Divided Lites can be done in Regular, Ogee, Square, and Special Mullions. These doors are fitted for individual glass per lite. These doors have 7/8" wide mullions unless otherwise specified. Glass retainer moulding is not available. Specify "True Divided Lites" when odering.
Retainer Moulding Options
Frame Only and Mullion doors come standard with retainer moulding groove.
(Regular Bead Shown Above)		 Non-grooved is available. Simply specify "no rout for retainer moulding" in code portion of the order form.
(Regular Bead Shown Above)
Glass Moulding Options
Clear:
Standard for 1/8" glass only.
#906:
For 1/8" glass only.
#907:
For 1/4" glass only.
#52:
For varying glass thickness.
Use on radius doors.
#83:
Similar to #52.
Used on TW - 10961, 209 Series, and Barcelona.
Frame Only Door
  • Most of our door styles are available with a frame only option to match your solid panel door designs.
  • Frame only doors are a perfect accent and can accommodate a wide array of decorative glass and wire mesh inserts.
  • When ordering specify door design, size of the door, and "Frame Only".
Mullion Door Options

Standard Lite Mullions

  • Specify 4-lite, 6-lite, 8-lite, 10-lite or 12-lite ordering.
  • All lites will be evenly spaced unless otherwise requested. Odd mullion configuration charges will apply if custom spacing is requested.
  • All standard 3/4" and 1" framing beads available.
  • Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives. Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no retainer moulding" options available.
  • True divided lite option available.

9-Lite Offset Mullion

  •  9-lite mullion features 2" x 2" corner lites standard.
  •  All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Odd mullion configuration upcharge applies.
  • True divided lite option available.

11-Lite Offset Mullion

  • 11-lite mullion features 2" x 2" corner lites standard.
  • All standard 3/4" and 1" framing available.
  •  Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Odd mullion configuration upcharge applies.
  • True divided lite option available.

Odyssey Mullion

  • A six lite design with two mullion strips extending below horizontal mullion.
  • A dimensioned sketch must accompany each Odyssey mullion order.
  • All standard 3/4" and 1" framing available.
  •  Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Odd mullion configuration upcharge applies.
  • True divided lite option available.

Diamond Mullion

  • Features a 4" x 4" diamond lite centered left and right in opening and 4 1/2" from top rail. Diamond lites centered left and right in opening and 4 1/2" from top and bottom rails.
  • All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Diamond mullions will be quoted through Special Designs. Additional lead-time required.

Double Diamond Mullion

  • Double Diamond mullion features two
    4" x 4 " Diamond lites centered left and right in opening and 4 1/2" from top and bottom rails.
  • All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Diamond mullions will be quoted through Special Designs. Additional lead-time required.

Arched Lite Mullion
Arched Mullion

  • Arched lite mullions feature seven radius lites.
  • All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular and Square Only.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Arch Lite mullions will be quoted through Special Designs. Additional lead-time required.
  • An AutoCad drawing will be faxed to the customer for approval prior to manufacturing.

Double Arched Lite Mullion
Double Arched Mullion

  • Double arched lite mullions feature 12 radius lites.
  • All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular and Square only.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • Double Arch mullions will be quoted through Special Designs. Additional lead-time required.
  • An AutoCad drawing will be faxed to the customer for approval prior to manufacturing.

X Lite Mullion X Mullion

  • Features diagonal mullion pattern.
  • All standard 3/4" and 1" framing available.
  • Mullion profiles available in Regular, Ogee and Square. Elite frame bead receives Regular mullion profile.
  • Clear plastic retainer moulding standard unless otherwise specified. Wood retainer moulding or "no moulding" options available.
  • X-lite mullions will be quoted through Special Designs. Additional lead-time required.
  • An AutoCad drawing will be faxed to the customer for approval prior to manufacturing.