Flat Panel Doors
Go to the bottom of this page for Product Offerings and Availabilities. Below each color photograph are listed the Door Design, the minimum sizes, panel information and the Drawer Front name. The line drawing below each photograph shows a cross-section of the door. All doors below are shown in Hickory.
TW 10
Min.: 7" w x 5"h
1/4" Veneered Panel
Drawer Front: TW 10 DF
TW 10916
Min.: 7" w x 5 7/8"h
Face-1 15/16" Frame
Back-2 5/16" Frame
9/16" Veneered Panel
Drawer Front: TW 10916 DF
TW 20
Min.: 8 1/4" x 6 3/4"h
1/4" Veneered Panel
Drawer Front: #10
TW 30
Min.: 8 1/4" w x 6"h
1/4" Veneered Panel
Drawer Front: Slab
TW 90
Min.: 8 1/4" w x 6 3/4"h
1/4" Veneered Panel
Drawer Front: TW 10 DF
Product Offering and Availabilities:
  • Veneer Specifications: All TW Series doors use 1/4" veneered, composite core except TW 10916 which uses a 9/16" veneered MDF core panel. All panels except White Birch use a plain sliced face or half round face and rotary back veneer. White Birch uses a rotary face and back.
  • Wood Species: TW 10, TW 20, TW 30 & TW 90 available in all 3/4" and 1" species except for Soft Maple or Rustic Knotty species. TW 10 916 available in 3/4" Cherry, Hard Maple, Hickory, Pine, Paint Grade, Red Oak, Walnut, White Ash and White Birch.
  • Edge Profiles: All available
  • Framing Beads: All available except TW 10916 which comes as shown above.
  • Panel Raises: As specified above.
  • Options:
    All available except G-121 rout on TW 10, TW 20, TW 30, & TW 90.
  • Mullions: All available except TW 10916 which must be ordered as a CRP 10 Mullion Door with Square Bead Framing.
  • Appliance Panels: All available except TW 10916 which are only available with the apply over plywood glue-in strips option.