Mitered Flat
Panel Doors
Go to the bottom of this page for Product Offerings and Availabilities. Below each color photograph are listed the Door Design, the minimum sizes, panel information and the Drawer Front name. The line drawing below each photograph shows a cross-section of the door. All doors below are shown in stained Red Oak.
TW 10 Miter
Min.: 5" w x 5"h
1/4" Veneered Panel
Drawer Front: TW 10 Miter DF
TW 1420
Min.: 6 1/4" w x 6 1/4"h
1/4" Veneered Panel
Drawer Front: TW 1420 DF
TW 10318
Min.: 6 1/4" w x 6 1/4"h
1/4" Veneered Panel
1/4" Radius Corners Standard
Drawer Front: TW 10318 DF
TW 10382
Min.: 6 1/4" w x 6 1/4"h
1/4" Veneered Panel
Drawer Front: TW 10382 DF
TW 10533
Min.: 5" w x 5"h
1/4" Veneered Panel
Drawer Front: TW 10533 DF
TW 10751
Min.: 5" w x 5"h
1/4" Veneered Panel
Drawer Front: TW 10751 DF
TW 10827
Min.: 5" w x 5"h
1/4" Veneered Panel
Drawer Front: TW 10827 DF
TW 10875
Min.: 6 1/4" w x 6 1/4"h
2 7/8" Framing
1/4" Veneered Panel
Drawer Front: TW 10875 DF
TW 10946
Min.: 8" w x 8"h
1/4" Veneered Panel
Drawer Front: TW 10946 DF
Presidential Miter
Min.: 5 3/8" w x 5 3/8"h
2 1/2" Framing
1/4" Veneered Panel
Drawer Front: Presidential Miter DF
Product Offering and Availabilities:
  • Note: Due to the construction complexity, all multiple panel mitered doors include an additional charge per middle and upright rail plus the per-panel design charge. Framing width on all designs is determined by measuring across the back of the framing.
  • Wood Species: All designs available in 3/4" species except soft maple, quarter sawn or rustic knotty. TW 10522 Miter available on all 3/4" and 1" species except lyptus, soft maple, quarter sawn, or rustic knotty.
  • Edge Profiles: TW 1420, TW 10318, TW 10875, and TW 10946 standard as shown. TW 10827 only as shown. Other doors - all 3/4" profiles available.
  • Framing Beads: TW 10 all available. All other doors as shown.
  • Panel Raises: All doors show 1/4" veneer panel.
  • Options: All doors can receive G-012, G-015, G-056 groove, back routed hand pull, concealed hinge routs. All doors can receive face routed hand pull except TW 10827, TW 10318, TW 1420, TW 10875 and TW 10 946. All doors can receive soss hinge except TW 10827.
  • Mullions: All available and incur a special lite charge except TW 10 Miter.
  • Appliance Panels: All styles available with apply over plywood or glue-in strips, except TW 10827, TW 10318, which are available with apply over plywood option only.