Mitered Raised
Panel Doors
Go to the bottom of this page for Product Offerings and Availabilities. Below each color photograph are listed the Door Design, the minimum sizes, panel information and the Drawer Front name. The line drawing below each photograph shows a cross-section of the door. All doors below are shown in Hard Maple.
CRP 1389
Min.: 7 1/2" w x 7 1/2"h
2 5/16" Framing
Slant Raise Shown
Drawer Front: CRP 1389 DF
CRP 1420
Min.: 8 1/4" w x 8 1/4"h
2 11/16" Framing
M-Bead Raise Shown
Drawer Front: CRP 1420 DF
CRP 10318
Min.: 8 7/8" w x 8 7/8"h
2 15/16" Framing
Louis XIII Raise Shown
Drawer Front: CRP 10318 DF
CRP 10191
Min.: 7 1/8" w x 7 1/8"h
2 1/2" Framing
Rev. G-Cove Raise Shown
Drawer Front: CRP 10191 DF
CRP 10334
Min.: 7 1/2" w x 7 1/2"h
2 5/16" Framing
M-Bead Raise Shown
Drawer Front: CRP 10334 DF
CRP 10827
Min.: 7 1/2" w x 7 1/2"h
2 5/16" Framing
M-Bead Raise Shown
Drawer Front: CRP 10827 DF
CRP 10875
Min.: 8 5/8" w x 8 5/8"h
2 7/8" Framing
RM Raise Shown
Drawer Front: CRP 10875 DF
CRP 10946
Min.: 8" w x 8"h
2 15/16" Framing
M-Bead Raise Shown
Drawer Front: CRP 10946 DF
Prestige
Min.: 7 7/8" w x 7 7/8"h
2 7/8" Framing
Slant Raise Shown
Drawer Front: Prestige DF
Presidential Miter
Min.: 7 7/8" w x 7 7/8"h
2 1/2" Framing
Presidential Raise Shown
Drawer Front: Presidential Miter DF
CRP 10 Miter
Min.: 7 1/2" w x 7 1/2"h
2 5/16" Framing
Slant Raise Shown
Drawer Front: CRP 10 Miter DF
CRP 10382
Min.: 7" w x 6 3/4"h
2 5/16" Framing
Reverse G-Cove Shown
Drawer Front: CRP 10382 DF
CRP 10533
Min.: 7 1/2" w x 7 1/2"h
2 5/16" Framing
Slant Raise Shown
Drawer Front: CRP 10533 DF
CRP 10605
Min.: 5 3/8" w x 5 3/8"h
2 1/16" Framing
Chamfer Raise Shown
Drawer Front: CRP 10605 DF
CRP 10751
Min.: 7 1/2" w x 7 1/2"h
2 5/16" Framing
Slant Raise Shown
Drawer Front: CRP 10751 DF
Milan
Min.: 7 1/2" w x 7 1/2"h
2 15/16" Framing
P-441 Raise Shown
Drawer Front:
Milan (with P-057 Raise)
Mirage
Min.: 10 5/8" w x 10 5/8"h
3 7/8" Framing
Slant Raise Shown
Drawer Front:
Mirage (with P-057 Raise)
Product Offering and Availabilities:
  • Special Note: Due to the construction complexity, all multiple panel mitered doors include an additional charge per middle and upright rail plus the per-panel charge. Framing width on all designs is determined by measuring across the back of the framing. Minimums listed are based on panel raises shown. Minimums will vary depending on the panel raise selection.
  • Wood Species: All 3⁄4” and 1” species available in CRP 10 Miter except quarter sawn and rustic knotty. All other doors are available in 3/4" only.   Mitered doors are not available in  quarter sawn and rustic knotty. Mahogony, Knotty Pine, and Walnut require additional lead time.
  • Edge Profiles: CRP 10 Miter, CRP 1389, CRP 10382, CRP 10533, Presidential Miter, CRP 10605, CRP 10751, Mirage – all 3⁄4” profiles available. CRP 10318 standard as shown or C2, LC2, and PRS2. CRP 10191, CRP10334, CRP 1420, CRP 10827, CRP 10875, CRP 10946, Prestige, Milan – no choices available.
  • Framing Beads: CRP 10 Miter – all available.   All other designs – no choices available.
    Panel Raises: CRP 10605 – Chamfer or Reverse Cove only. All other doors – all 3⁄4” raises available.
  • Panel Raises: All 3/4" raises available.
  • Options:
    Radius corners standard on CRP 10318. Square corners can be specified.
    All designs can receive V-groove, back-routed hand pull, distressing, wear sanding, concealed hinge routs, G-012, G-056, and G-121 rout.
    Soss hinge rout available on all designs except CRP 10827, CRP 10946, Prestige, & Mirage.
    CRP 10 Miter, CRP 10382, CRP 10533, CRP 1389, CRP 10605, CRP751, & Presidential Miter can receive face routed hand pull only.
    CRP 10605 & CRP10751 available in a mortise & tenon construction.
    Mullions:  All available except CRP 10191. CRP 10 Miter will receive standard mullion lite charge.  Milan – square bead only, special lite charges apply. Mirage – regular bead mullions only.  All others incur special lite charges.
    Appliance Panels:  CRP 10 Miter, CRP 1389, CRP 10382, CRP 10533, CRP 10605, CRP 10751,  Presidential Miter, & Mirage available with apply over plywood option or glue-in strip option.  All others apply over plywood option only.
    Complimentary Drawer Fronts: Matching drawer fronts available for all designs.
  • Mullions: All available with special lite charges.
  • Appliance Panels: All styles available with apply over plywood option. Presidential Miter available with apply over plywood option or glue-in strip option.
  • Complimentary Drawer Fronts: Matching drawer fronts available for all designs.