Slab, Batten, and Louver Doors
Go to the bottom of this page for Product Offerings and Availabilities. Below each color photograph are listed the Door Design, the minimum sizes, panel information and the Drawer Front name. The line drawing below each photograph shows a cross-section of the door. All doors below are shown in various stained wood species.
V 200
Min.: 6" w x 7 1/2"h
Grooves are randomly placed
2 5/16" Rails on face
Drawer Front: Slab
CWS 10302
Min.: 7 1/2" w x 7 1/2"h
Styles - 2 5/16"
Framing on face of rails varies
from 2" to 2 13/16"
depending on height of door
Drawer Front: Slab
DVG Batten
Min.: 6" w x 7 1/2"h
Grooves are randomly placed.
Battens are attached to back.
See Batten Specifications below.
Drawer Front: DVG Batten DF
CWS 10446
Min.: 7 1/2" w x 7 1/2"h
2 5/16" Framing on face of
styles and top rail.
Bottom rail framing varies on
face from 2 1/8" to 2 15/16"
Drawer Front: Keystone
Batten Specifications:
Batten location - 3" from top and bottom of door. 1 7/8" from each door edge.
Flushbatten
Min.: 6" w x 7 1/2"h
Battens are attached to the back. See Batten Specifications at right.
Drawer Front: Slab
Product Offering and Availabilities:
  • Note: We do not guarantee that louvers on single opening CWS 10446 doors wider than 26" will not bow, twist or warp creating unequal spacing.
  • Wood Species: All 3/4" species available except CWS 10446 and CWS 10302 which are not available in quarter sawn and rustic knotty species.
  • Edge Profiles: All 3/4" profiles
  • Framing Beads: No choices available.
  • Panel Raises: No choices available.
  • Options: Flush Batten - all options available except Camelot rout.
    CWS 10302, CWS 10446 - all options except G-012, G-015, G-056, G-121 routs, and Camelot rout.
    V 200 and DVG Batten - radius corners, face routed hand pull, back routed hand pull and pegs only.
    Note: CWS 10302 and CWS 10446 are not available in Colourtones.
  • Mullions: Not available
  • Appliance Panels: Apply over plywood or glue-in strips available on all doors except Flush Battens. Flush Battens - glue-in strips only available.