Wood Cutlery Dividers

Maple Craft USA now offers wood cutlery dividers, knife block inserts, and spice tray inserts to be used inside our wood dovetail drawer boxes or plywood drawer box systems. All are custom made to your specifications.
  • Available in Aspen and Hard Maple.
  • Butt joint construction. Pinned with 1/2" headless pins.
  • 3/8" sides interior and exterior.
  • When ordering specify design A, B, C, D, E, F, G or H.
  • Specify depth and width in 1/16" increments. Both dimensions are from outside edge to outside edge.
  • Depth for all designs must be between 16" and 22". Refer to specific design for width range.
  • Please specify exact dimensions of cutlery divider (w x d x h) when ordering. We do not want the overall outside dimensions of your drawer box.
  • To order custom size cutlery divider, specify the depth, width and design separately and lable "Custom".
  • Standard height is 3-1/8". Height modifications available.
Reduced Height Option (upcharge) No Bottom Option (no upcharge)
All divider designs can be reduced in height for specialty applications. All cutlery divider designs are constructed with a 1/4" bottom unless "NO BOTTOM" is specified.
Specify divider height when ordering.
Minimum divider height with bottom is 1-5/8".
Minimum divider height without bottom is 1-3/8".
Knife Block Insert Spice Tray Insert
  • Knife block and handle rest are unfinished Hard Maple mounted on a prefinished 1/4" bottom.
  • Slot spacing is 1-1/4" between slots.
  • Minimum Inset: 7-1/2" wide x 16" deep.
  • Maximum insert: 21" wide x 22" deep.
  • Available in Aspen or Hard Maple.
  • 3/4" diameter finger hole centered on lead rail for ease of removal from a drawer box.
  • Spice rests are 5-1/4" wide, 1-1/2" high.
  • Minimum insert: 7-1/2" wide x 17" deep.
  • Maximum insert: 32" wide x 22 " deep.

How To Order Wood Cutlery Dividers

To request a price quote, send us an e-mail or fax us (800-756-9077) the following information:

1. Wood Species: Available in Hard Maple or Aspen.

2. Specify Design (Shown Above).

3. Sizes:

  • Specify depth and width in 1/16" increments. Both dimensions are from outside edge to outside edge.
  • Depth for all designs must be between 16" and 22". Refer to specific design for width range.
  • Please specify exact dimensions of cutlery divider (w x d x h) when ordering. We do not want the overall outside dimensions of your drawer box.
  • To order custom size cutlery divider, specify the depth, width and design separately and lable "Custom".
  • Standard Height is 3-1/8". Height modifications available.

4. Specify if the Cutlery Drawer is to have a Reduced Height Option or No Bottoms Option.

Toll Free Phone:
Toll Free Fax:
800-756-8077
800-756-9077
Local Phone:
Local Fax:
814-756-4400
814-756-5640
Maple Craft USAP.O. Box 2617 West State StreetAlbion, PA 16401E-mail: maplecraftusa@yahoo.com