Wood Veneer & Plywood for Kitchen Cabinet Refacing
Maple Craft USA now offers wood veneer and plywood, available unfinished or finished, to match your finished wood cabinet doors and accessories. These materials can be used on your next kitchen cabinet refacing project. (Visit our Solid Wood Cabinet Doors to learn more about our finishing program.)
These materials are ideal for refacing or adding finishing touches to your kitchen refinishing work. These wood veneers and plywood come in a variety of wood species, grades, and sizes.
As a reminder: Wood Veneer and Plywood (which is faced with wood veneer) is not an exact match to solid wood products. But it still is an excellent choice to accomplish the task at hand.
Wood Veneers Are Available in 2 Types:
Pressure Sensitive Veneers (24” x 96”): These veneers feature veneer faces with pre-glued adhesive backers and a protective layer that can simply be peeled away from the backer prior to application. Thickness including the backer is approximately 1/32” thick. 2-Ply Veneers (48.5” x 97”) : These veneers feature a real wood face and a wood backer. 2-Ply wood veneer allows for the staining of the edges and reduces the “black-line” effect. Thickness including the backer is slightly less than 1/16” thick.
Wood Species Available:
We offer the following 11 wood species: Alder, Cherry, Hard Maple, Red Oak, White Ash, White Birch, Hickory, Lyptus, White Oak, Knotty Pine, and Walnut.
One end and one side of any veneer panel is guaranteed to be free from physical damage.
Veneers are not guaranteed to perfectly match solid wood doors. Veneer is sliced from premium material; color and grain match will be more uniform than solid wood doors. Hickory veneers may contain mineral streaks and peck marks.
We do not accept returns on veneers.
We are not liable for the application of veneers. Use veneer manufacturer’s application instructions for adhesive selection and recommended application steps.
Finishing is available for all veneers. Stained veneers may vary slightly in color from solid wood products of the same species. As with all finish products, additional lead time is required.
Wood backed 2-Ply veneers are not available with Colourtone finishes.
1/4" Short Grain Plywood Program:
Wood Species Available: Available in Cherry, Hard Maple, Red Oak, and Hickory.
Grades: 1/4" thick material with Grade A face veneers applied over an MDF core with a sound back.
Sizes: 96” x 48” panels for island back or wall panel applications. Grain runs vertically in the 48” direction. Must be shipped via Common Carrier.
Wood Species Available: 1/4" Plywood is available in Alder, Ash, White Birch, Cherry, Hard Maple, Hickory, Knotty Pine, Lyptus, Quarter Sawn Red Oak, Quarter Sawn White Oak, Red Oak, White Oak, and Walnut.
3/4" Plywood is available in Alder, Cherry, Hard Maple, and Lyptus.
Grades: 1/4" thick sheet stock has Grade A face veneers applied over an MDF core with a sound back.
3/4" thick sheet stock has Grade A face veneers applied over plywood core with prefinished natural Birch back.
Sizes: 1/4" and 3/4" sheet stocks are available in full 4’ x 8’ sheets or as cut-to-size panels.
Over Size Packaging Charges apply when plywood exceed 35” wide and 35” long or 48” wide or 85” long.